How to Make Easy Crochet Slippers, Shell Slipper
I wanted to design a free crochet slipper pattern as it has been requested by my readers many times before. So I came up with these quick crochet slippers that are simple and elegant at the same time.



You can pin it for later here.
Now that the holiday gifting rush is over you can make these warm slippers for yourself. Some self-love won’t hurt, will it? I hope they keep you warm and comfy.
This is an easy slipper pattern that is worked in one piece. Once you make one, I bet everyone in your family would want one too.
Free Crochet Slipper Pattern
Materials
1. Worsted weight yarn. Caron United in color Soft Grey Heather was used for the sample.
2. Hook 7 (4.5 mm)
Size
Small (Fits US sizes 5& 6): Slipper is 9 inches long
Medium (Fits US sizes 7 & 8): Slipper is 9 1/2 inches long
Large(Fits US sizes 9 & 10): Slipper is 10 inches long
Gauge
Working in hdc crochet, 16 sts and 8 1/2 Rows= 4 inches
Stitch Abbreviations
The pattern is written in standard American terms.
ch- chain
sc-single crochet
dc- double crochet
sl st- slip st
sk- skip
Stitch Explanation
Shell: 5 dc worked into the same st.
sc2tog ( single crochet decrease): This will join 2 sts into one. To work a sc2tog, [insert your hook into the next st and pull up a loop]2 times, yarn over and pull through all the loops on your hook.
Pattern
Note: Sizes Small and Medium are grouped together and size Large is given separately.
Sizes Small and Medium

Toe Top
Round 1: Ch 6, 1 sc in 2nd ch from hook, 1 sc in next 3sts, 4 sc in last st, pivot your work to work along the other side of the foundation chain, 1 sc in next 3 free loops of the foundation ch, 2 sc in last free loop, sl st to first ch. Do not turn.——14 sts

Note: The end of the round stitch counts include the chains between the stitches as well.
Round 2: Ch 3(counts as a dc here and throughout), 2 dc in same st as ch 3, ch 1, sk 1, 1 sc in next, *(ch 1, sk 1, 3 dc in next, ch 1, sk 1, 1 sc in next), repeat from * 2 times until you end with a sc in the same st as beginning ch-3, ch 1, sl st to the top of beginning ch-3. Do not turn.———-24 sts
Round 3: 1 sc in next dc, place a marker in the sc you just made, *(ch 1, sk the next dc and ch 1, 3 dc in next sc, ch 1, 1 sc in the middle dc of the next 3dc group, ch 1, sk next dc and ch 1, 4 dc in next sc, ch 1, 1 sc in the middle dc of the next 3dc group), repeat from * and after you work 4dc in the last sc st, ch 1, sl st to first marked sc. Do not turn.——-26sts
Note: You will be skipping dc sts to work a shell into the sc.
Round 4: Ch 3, 4 dc in same st as ch-3, ch 1, 1 sc in middle dc of next 3dc group, ch 1, shell in next sc, ch 1, 1 sc in 3rd dc of next 4 dc group, ch 1, shell in next sc, ch 1, 1 sc in middle dc of next 3dc group, ch 1, shell in next sc, ch 1, 1 sc in 3rd dc of next 4 dc group, ch 1, sl st to top of beginning ch 3. Do not turn.————32 sts (4 shells)
Round 5: Sl st into next dc, 1 sc in next, place a marker in the sc you just made, ch 1, shell in next sc, *(ch 1, 1 sc in middle dc of next shell, ch 1, shell in next sc), repeat from * and after shell in the last sc, ch 1, sl st to first marked sc. Do not turn——32 sts(4 shells)
Round 6: Ch 3, 4 dc in same st as ch-3, *(ch 1, 1 sc in middle dc of next shell, ch 1, shell in next sc), repeat from * and after 1 sc in 3rd dc of the last shell, ch 1, sl st to top of beginning ch 3. Do not turn.————32 sts (4 shells)
Round 7: Repeat Round 5.
Round 8: Repeat Round 6. Do not turn and do not fasten off.
Middle and Back of the Slipper

Notes
1. This part is worked in rows and then the backside is seamed to close the slipper.
2. The beginning ch2 does not count as a stitch in the following rows.
Row 1: Working in back loops only, ch 2, 1 hdc in same st as ch 2, 1 hdc in next 20 sts, turn.——21 sts
Row 2: Working in front loops only, ch 2, 1 hdc in same st as ch 2, 1 hdc in next 20 sts, turn.——21 sts

Repeat the above 2 rows until your shoe measures 6 1/2 inches for size Small and 7 inches for size Medium.
Increase Rows
Note: Maintain the sequence of working into the back and front loops. On the right side of the shoe, you will work in back loops, and on the wrong side, you will work into the front loops.
Increase Row 1:Ch 2, 1 hdc in same st as ch 2, 2 hdc in next, 1 hdc in each st until 2 sts are left, 2 hdc in next, 1 hdc in last st. turn.——23 sts
Repeat the above increase row 2 more times to end in 27 sts and turn.
Next Row: Ch 2, 1 hdc in same st as ch 2, 1 hdc in next 26 sts, turn.——27 sts

Last Row: Ch 1, 1 sc in same st as ch 1, 1 sc in next 3 sts, 1 hdc in next 4 sts, 1 sc in next 2 sts, (sc2tog)3 times, 1 sc in next 2 sts, 1 hdc in next 5 sts, 1 sc in last 4 sts.——24 sts.

Now fold and seam the backside of the slipper with sl sts. Fasten off. The seam should be worked inside the slipper.
Border Around the Slipper
You will now work 2 rounds around the opening of the slipper with a few decreases thrown in. This will make your slippers snug and keep it from falling off your feet. You will be working across row ends for the most part and will have to distribute your sc as evenly as possible.

Round 1: Sl st to the back seam, ch 1, sc2tog, work sc evenly around the slipper with 5 decreases (sc2tog), 1 at the back, 1 on either side and 1 at each of the corners of the toe top as shown. Sl st to the 1st sc, do not turn.——-48(52) sts
Round 2: Ch 1, 1 sc in same st as ch 1, *(sk 1 st, 1 sc in next, 1 sc in the previous skipped st), repeat from * to end and sl st to the first sc. Fasten off and weave in the tails.
Your slipper is now ready to keep you warm and comfy!
Size Large
Note: Please take a look at the pictures given for the smaller sizes before you start.
Round 1: Ch 8, 1 sc in 2nd ch from hook, 1 sc in next 5 sts, 4 sc in last st, pivot your work to work along the other side of the foundation chain, 1 sc in next 5 free loops of the foundation ch, 2 sc in last free loop, sl st to first ch. Do not turn.——18 sts

Note: The end of the round stitch counts include the chains between the stitches as well.
Round 2: Ch 3(counts as a dc here and throughout), 2 dc in same st as ch 3, ch 1, sk 1, 1 sc in next, *(ch 1, sk 1, 3 dc in next, ch 1, sk 1, 1 sc in next), repeat from *3 times until you end with a sc in the same st as beginning ch-3, ch 1, sl st to the top of beginning ch-3. Do not turn.———-30 sts
Round 3: 1 sc in next dc, place a marker in the sc you just made, *(ch 1, sk the next dc and ch 1, 3 dc in next sc, ch 1, 1 sc in the middle dc of the next 3dc group), repeat from * and after you work 3dc in the last sc st, ch 1, sl st to first marked sc. Do not turn.——-30sts
Note: You will be skipping dc sts to work shell into the sc.
Round 4: Ch 3, 4 dc in same st as ch-3, *(do not ch 1, 1 sc in middle dc of next 3dc group, ch 1, shell in next sc), repeat from * and after 1 sc in middle dc of last 3 dc group, ch 1, sl st to top of beginning ch 3. Do not turn.————35 sts (5 shells)
Round 5: Sl st into next dc, 1 sc in next, place a marker in the sc you just made, ch 1, shell in next sc, *(do not ch 1, 1 sc in middle dc of next shell, ch 1, shell in next sc), repeat from * and after shell in the last sc, do not ch 1, sl st to first marked sc. Do not turn——35 sts(5 shells)
Round 6: Ch 3, 4 dc in same st as ch-3, *(do not ch 1, 1 sc in middle dc of next shell, ch 1, shell in next sc), repeat from * and after 1 sc in middle dc of last shell, ch 1, sl st to the top of beginning ch 3. Do not turn.————35 sts (5 shells)
Round 7: Repeat Round 5.
Round 8: Repeat Round 6. Do not turn and do not fasten off.
Middle and Back of the Slipper
Notes
1. This part is worked in rows and then the backside is seamed to close the slipper.
2. The beginning ch2 does not count as a stitch in the following rows.
Row 1: Sl st in next dc, working in back loops only, ch 2, 1 hdc in same st as ch 2, 1 hdc in next 22 sts, turn.——23 sts
Row 2: Working in front loops only, ch 2, 1 hdc in same st as ch 2, 1 hdc in next 22 sts, turn.——23 sts
Repeat the above 2 rows until your shoe measures 7 inches.
Increase Rows
Note: Maintain the sequence of working into the back and front loops. On the right side of the shoe, you will work in back loops, and on the wrong side, you will work into the front loops.
Increase Row 1: Ch 2, 1 hdc in same st as ch 2, 2 hdc in next, 1 hdc in each st until 2 sts are left, 2 hdc in next, 1 hdc in last st. turn.——25 sts
Repeat the above increase row 2 more times to end in 29 sts and turn.
Next Row: ch 2 1 hdc in same st as ch 2, 1 hdc in next 26 sts, turn.——29 sts
Repeat the above row one more time.
Last Row: Ch 1, 1 sc in same st as ch 1, 1 sc in next 3 sts, 1 hdc in next 5 sts, 1 sc in next 2 sts, (sc2tog)3 times, 1 sc in next 2 sts, 1 hdc in next 6 sts, 1 sc in last 4 sts.——26 sts.
Now fold and seam the backside of the slipper with sl sts. Fasten off. The seam should be worked inside the slipper.
Border Around the Slipper
You will now work 2 rounds around the opening of the slipper with a few decreases thrown in. This will make your slippers snug and keep it from falling off your feet. You will be working across row ends for the most part and will have to distribute your sc as evenly as possible.
Round 1: Sl st to the back seam, ch 1, sc2tog, work sc evenly around the slipper with 7 decreases (sc2tog), 1 at the back, 2 on either side and 1 at each of the corners of the toe top as shown ( see pic for smaller sizes). Sl st to the 1st sc, do not turn.——-57 sts
Round 2: Ch 1, 1 sc in same st as ch 1, *(sk 1 st, 1 sc in next, 1 sc in the previous skipped st), repeat from * to end and sl st to first sc. Fasten off and weave in the tails.
Your slipper is now ready to keep you warm and comfy!
Pin it for later here.

You can see the most popular Boots pattern on my blog here.
See the full collection of patterns here: Pattern Gallery.

Thank you!
You are welcome, thank you for visiting my blog.
I saw these on Facebook and the are fabulous ?
Thank you, I am so glad you like them.
How do you print free pattern
You can copy paste it onto a word document.
can you email this pattern?
I’m looking at Ur pattern ony Android phone and would like to email it to myself. Could U tell me how to do that Plz. I don’t want to loose this pattern or Ur website.
You can bookmark my site or purchase a pdf copy for $2.50 here: https://www.lovecrochet.com/us/shell-slipper-crochet-pattern-crochet-pattern-by-crochet-dreamz
how do you print free patterns
You can try copy pasting the pattern or purchase an Ad-Free pdf for $2.50 here: https://www.lovecrochet.com/us/shell-slipper-crochet-pattern-crochet-pattern-by-crochet-dreamz
Thank-you for sharing your talent with us all. All the ladies in my family are going to enjoy a pair of these beautiful slippers. Thanks again
You are very welcome, I am really glad you like them.
Those look quite comfy.
Thank you, I am glad you like them.
Thank you so much for the pattern!
Thank you for the free pattern. I am a beginner. I love the slippers. Looking forward to making a pair.
I am glad you like it. Thank you for visiting my blog.
These slippers are wonderful and so easy to make, thank you so much, I am sure I will be making lots of these!
Hi Annette, I am really glad you like them. Thank you for visiting my blog.
In regards to the pattern are all sizes worked the same except for the length in which you measure ?….I don’t see any parentheses for changing stitches for the size…… Thank you…..
Hi Veronica. sizes Small and Medium differ only in their lengths but size Large differs in the shell rows as well. Size Large is given separately.
I have a question. the pattern reads
Border Around the Slipper
You will now work 2 rounds around the opening of the slipper with a few increases thrown in. This will make your slippers snug and keep it from falling off your feet. You will be working across row ends for the most part and have to distribute your sc as evenly as possible.
Round 1: Sl st to the back seam, ch 1, sc2tog, work sc evenly around the slipper with 7 decreases (sc2tog), 1 at the back, 2 on either side and 1 at each of the corners of the toe top as shown ( see pic for smaller sizes). Sl st to the 1st sc, do not turn.——-57 sts
Round 2: Ch 1, 1 sc in same st as ch 1, *(sk 1 st, 1 sc in next, 1 sc in the previous skipped st), repeat from * to end and sl st to first sc. Fasten off and weave in the tails.
Where are the increases you are referring to? I’m confused.
Hi Pat, please take a look at Picture 7 in the pattern. It shows you where to work the decreases. I hope that helps.
I am so sorry, that are decreases(sc2tog) and not increases. Thank you so much for bringing this to my attention. I just corrected it.